AM06403 -

AM06403

WPC Click

WPC floor is made by combining a wood product composite (WPC) core with a luxury vinyl tile(LVT) top. The LVT top provides the excellent surface of vinyl along with its attractive wood and stone visuals. The WPC core well supports the LVT part and also with strong click in it.
It is also click system installation, which can go over the subfloor without much preparation same as the installation of laminate flooring.
Its minimum thickness is 5.5mm (4.0mm WPC+1.5mm LVT).

Code No.:AW06403

Dimension	12"24" (304.8mm609.6mm)	4.0+1.5mm Packing	12 pcs/78 boxes/20 pallets/3478.28 sqms
		4.5+1.5mm Packing	12 pcs/78 boxes/20 pallets/3478.28 sqms
		5.0+1.5mm Packing	10 pcs/78 boxes/20 pallets/2898.57 sqms
		5.0+2.0mm Packing	10 pcs/78 boxes/20 pallets/2898.57 sqms
Overall Thickness	4.0mm,5.0mm
Wear Layer	0.2mm-0.7mm
Edge	Microbevel (Wear layer above 0.3mm)
Texture	Deep Embossed, Light Embossed, Woodtick, Wood Grain, Handscraped, EIR
Finish	UV coating glossy 13-15 degrees
	UV coating Semi-matt 5-7 degrees
	UV coating matt 3-5 degrees
Material	100% virgin
Installation Method	Unilin Click
Underlayment	2.0mm Cork 1.5mm Eva Foam 2.0mm IXPE

TECHNICAL SPECIFICATION
Characteristics	Standards	WPC Click
Thickness	EN428	7mm; Tolerance of+0.13mm,-0.1mm
Wear Layer	EN428/ENISO24340	0.55mm
Squareness	ASTM F2055-10	≤0.25mm
Surface Treatment		Urethane Ceramic Bead
Performance classification	EN685/EN ISO 10874 ASTM F1700	42:Light industrial general 33:Commercial heavy 23:Domestic heavy ClassⅢ Type B
Guarantee	Light industrial Commercial Domestic	10 years 15 years Life Time
Dimensional stability	EN434 ASTM F 2199	≤0.5% ≤0.048in/ft
Static load	ASTM F-970	0.01mm
Resistance to impact	ASTMF 1265	No crack
Residual indentation	EN 433 ASTM F1914	Average≤8 Max≤10%
Flexibility	ASTM F137 EN435
Abrasion resistance	EN 660-2 ASTM 3389	Group T Pass Wear index:0.128
Resistance to heat	ASTM F1514	E=0.34
Light fastness	EN ISO 105-B02 ASTM F-1515	≥6 E=1.61
Reaction to fire	EN 13501-1 ASTM E-648-06	Bfl-S1 ClASS 1
Smoke density	ASTM E662	Pass
Slip resistance	EN 13893 DIN51130 ASTM C-1028	Class DS R9 Dry:0.8 Wet:0.7
Chemical resistance	ASTM F925	Pass.No more than a slight change in surface dulling, surface attack or staining
Castor chair suitability	EN 425 NALFA/ANSI LF-11	Pass No visible damage after 25000 revolution
Underfloor heating		Suitable,max 27°C
VOC emissions	FloorScore DIBT

Back Catalog