|
|
|
|
|
| Dimension | 5.83"*48.03" (148mm*1220mm) |
4.0+1.5mm Packing | 11 pcs/78 boxes/20 pallets/3098.41 sqms | ||||||
| 4.5+1.5mm Packing | 10 pcs/78 boxes/20 pallets/2816.74 sqms | ||||||||
| 5.0+1.5mm Packing | 10 pcs/78 boxes/20 pallets/2816.74 sqms | ||||||||
| 7.00"*48.03" (178mm*1220mm) |
5.0+2.0mm Packing | 10 pcs/65 boxes/20 pallets/2823.08 sqms | |||||||
| Overall Thickness | 4.0mm,5.0mm | ||||||||
| Wear Layer | 0.2mm-0.7mm | ||||||||
| Edge | Microbevel (Wear layer above 0.3mm) | ||||||||
| Texture | Deep Embossed, Light Embossed, Woodtick, Wood Grain, Handscraped, EIR | ||||||||
| Finish | UV coating glossy 13-15 degrees | ||||||||
| UV coating Semi-matt 5-7 degrees | |||||||||
| UV coating matt 3-5 degrees | |||||||||
| Material | 100% virgin | ||||||||
| Installation Method | Unilin Click | ||||||||
| Underlayment | 2.0mm Cork 1.5mm Eva Foam 2.0mm IXPE |
||||||||
| TECHNICAL SPECIFICATION | ||
| Characteristics | Standards | WPC Click |
| Thickness | EN428 | 7mm; Tolerance of+0.13mm,-0.1mm |
| Wear Layer | EN428/ENISO24340 | 0.55mm |
| Squareness | ASTM F2055-10 | ≤0.25mm |
| Surface Treatment | Urethane Ceramic Bead | |
| Performance classification |
EN685/EN ISO 10874 ASTM F1700 |
42:Light industrial general 33:Commercial heavy 23:Domestic heavy ClassⅢ Type B |
| Guarantee | Light industrial Commercial Domestic |
10 years 15 years Life Time |
| Dimensional stability | EN434 ASTM F 2199 |
≤0.5% ≤0.048in/ft |
| Static load | ASTM F-970 | 0.01mm |
| Resistance to impact | ASTMF 1265 | No crack |
| Residual indentation | EN 433 ASTM F1914 |
Average≤8 Max≤10% |
| Flexibility | ASTM F137 EN435 |
|
| Abrasion resistance | EN 660-2 ASTM 3389 |
Group T Pass Wear index:0.128 |
| Resistance to heat | ASTM F1514 | E=0.34 |
| Light fastness | EN ISO 105-B02 ASTM F-1515 |
≥6 E=1.61 |
| Reaction to fire | EN 13501-1 ASTM E-648-06 |
Bfl-S1 ClASS 1 |
| Smoke density | ASTM E662 | Pass |
| Slip resistance | EN 13893 DIN51130 ASTM C-1028 |
Class DS R9 Dry:0.8 Wet:0.7 |
| Chemical resistance | ASTM F925 | Pass.No more than a slight change in surface dulling, surface attack or staining |
| Castor chair suitability | EN 425 NALFA/ANSI LF-11 |
Pass No visible damage after 25000 revolution |
| Underfloor heating | Suitable,max 27°C | |
| VOC emissions | FloorScore DIBT | |
